My Blog
The Journey
This shows the steps required to get a 30PC40 case.
Read moreHow Much Improvement?
This shows where the neck on the case will be pushed out to.
Read moreA Neck Clean Up Was Required
The loaded neck diameter was too tight for the chamber spec so it needed a skim to clean up the neck after expanding and to have clearance in the chamber.
Read moreFormed Cases
A mild charge of 2207 was put under some 125gr TNT's and fired. The result is a nice looking case.
Read moreWhat is the 30 PC40??
Well it started out as a conversation between myself and Luke at ProCal about what to do with a spare 6mm barrel.
Read moreStiller Predator PPC Face Lift
Not long after building the Predator McMillan had a Hunter Class stock on clearance, it was listed as a Pred V inlet but when it turned up it was for a Predator/Tac30.
Read moreStiller Predator PPC Action
Not long after i started dealing with Stiller they did a run of Single Shot Predator actions with a PPC bolt face and i had to get one.
Read moreP1000 6mmBR
Here is the complete rifle. P1000 action, McMillan MBR stock, Lilja Barrel, Jewell BR Trigger and Sightron SIII scope.
Read moreP1000 Ejection Port
The P1000 is Stillers competition action. It is a Right Bolt, Left Port, Right eject action which is fairly different to other target actions on the market.
Read moreP1000 Loading Port
The loading port of the P1000 is rather large which makes throwing down some fast shots in a Fly or Benchrest match easy.
Read moreStiller P1000
So have you ever wondered why the Stiller P1000 doesn't need a recoil lug?
Read moreRPR Final Thoughts
Another dynamite group with the Lilja.
Read moreRPR, Lilja and Midas +
Another great improvement due to a change in barrel.
Read moreRPR & SK Match
You can see there has been a big improvement in all of the types of ammo tested.
Read moreRPR Ammo Testing Take 2
To say i was happy with the result is an understatement.
Read moreRPR Accuracy
I shot ten shot groups at 50m, i made sure i fired 3 fouler's between ammo so there was no poi shift and this is the result.
Read moreRPR Lilja Has Arrived!
There are videos on youtube on how easy it was to pull the barrel out of a RPR so i thought it would be a 10 min job, this was not the case.
Read moreRuger Precision Rimfire
There was a lot of hype around on the Ruger Precision but it didn't appeal to me but when they announced the rimfire i got interested.
Read more22 Nosler Build Thoughts
I know a 14 twist wont be everyone choice for a 22cal.
Read more22 Nosler Range Time
I took some 30.5gr loads to the range and it was a 500y day.
Read more22 Nosler Chrono Time
I ran some data through quickload and settled on AR2219 with Remington 7 1/2 primers.
Read more22 Nosler Ready to Shoot
I had the Lilja barrel fitted to a Tac30 223 action by Col Crittenden. It dropped into a Cadex stock and was topped with a Sightron SIII 8-32x56.
Read more22 Nosler and 40gr Z-Max
The choice of projectile was easy, i had a few 500 packs of 40gr Z-Max on the shelf.
Read more22 Nosler vs 223 Remington
The 22 Nosler next to a 223 Remington. The Nosler has a case capacity of 35.6gr H2O while the 223 has 28.8gr so its about 25% bigger and runs off the same bolt face.
Read more22 Nosler
Where to start on a blog, i guess the 22 Nosler is as good a place as any.
Read more